Now, where does the parasitic capacitance come from? an inductor is made out of a coil of insulated wire, so there are tiny capacitors between the windings (since there are two sections of wire separated by an insulator). Each section of windings is at a slightly different potential (because of wire inductance and resistance).
http://electronics.stackexchange.com...gh-frequencies
Announcement
Collapse
No announcement yet.
Dissecting Erfinder’s comments
Collapse
This topic is closed.
X
X
-
Originally posted by Halfcutt View PostErfinder
I think insanity, would be seeing what you have displayed, and not wanting to build and understand how things work. Insanity would be not wanting to see how far you have gone with this!
Maybe you should remind us, how people which can afford to now, or in the future, can buy your learning tools.
I really wish I could buy your stuff, that it was just that easy. You should be compensated for your work. What I will also say is that I do not think I feel right about dissecting your work, now that I've seen what you've built, and how much work you've put into it. Unless you want people discussing it! What do you want Mr. Erfinder, besides to sell everyone a kit.
I am sure most here do understand how you feel, your worries, and hopes, I understand.
What I want is easy, I want you where I am now, not where I was! No one and I do mean no one is going to show you a machine running on its own. I want you to understand how "I" think something like that "may" be possible. Do not misunderstand, and or misinterpret that statement!! I do not have a self running machine, only principles which lead me to believe that we are not far from having one. You see the potential in the basic demonstration, I am sure your mind is all over the place about what "could" be going on and what you could do with it. Among a list of other things, I want to show you what the tool taught me about resonance! How frequency isn't a limiting factor. I am not going to go by the book there, because as far as my limited understanding goes, its not in the books. You all have experience with LC circuits of this I am fairly sure. Have you ever experienced a parallel resonant LC behaving as if it were a series resonant LC, a literal shift from one to the other?!? I told you I see things differently, I see a motor as being a electro-mechanical equivalent of an LC, and through this, I see way more than I used to. I have a much better understanding of how Tesla was able to claim that he could tap more power out of his "MOTORS" than the supply could deliver! In a way, one can say I am using a very small portion of whatever it is that he found to recharge the buffer. If the phasing between physical, magnetic, and dielectric components is proper, disconnection of the power supply results not only in recharging of the buffer, recovery and its load, but also in acceleration of the rotor!
As I have said..you can do what you want once you have seen what I see. You all take this statement too lightly. You think you have seen it all with the basic effects. Continue to think that, the tool is expensive, I am not sorry for that. You want it or you don't. I am not going to continue to be dragged into a debate about its importance. You need it if you want to see what I see, it is the teacher, not Erfinder!
Regards
Leave a comment:
-
Erfinder
I think insanity, would be seeing what you have displayed, and not wanting to build and understand how things work. Insanity would be not wanting to see how far you have gone with this!
Maybe you should remind us, how people which can afford to now, or in the future, can buy your learning tools.
I really wish I could buy your stuff, that it was just that easy. You should be compensated for your work. What I will also say is that I do not think I feel right about dissecting your work, now that I've seen what you've built, and how much work you've put into it. Unless you want people discussing it! What do you want Mr. Erfinder, besides to sell everyone a kit.
I am sure most here do understand how you feel, your worries, and hopes, I understand.
Leave a comment:
-
THANKS Steve you are generous.
it does bring back memories for me too.
I wish you a good day.
Leave a comment:
-
Originally posted by erfinder View PostThe effects are patent worthy....each and every effect could get its own patent. I am presenting this stuff here.....knowing that the sharks are here watching and learning, contemplating, and when the time comes they will patent what I am giving you for free! You better believe that when they get it, and they will, when it becomes theirs, you're out! They don't have my perspective, they don't have my time with the machines, they don't see what I see, and will not go where I am going with this, where I want all of us to go, together. I was reluctant to post that video because of what human nature has demonstrated in the past.....as an example of this twisted human nature,it's just been suggests that folks would love to start researching right there!?! Insanity!!! I am telling you that what you saw was superseded, and all you have to do to be up to date is get the tool so we can proceed, leaving the past in the past, and you say no!?! I am wasting my time here, and yours. You have what you want now, a demonstration of how easy it is, you will figure it out, but as I said in the video, by the time you do, you will be a day late and a dollar short. For the ones who have done what is necessary to move forward will be applying these principles to real machines while you are still trying to figure out on your own.
Regards
I know exactly what you mean about the patent, unfortunate that they even exist really.
video is ready slightly excited tbh...
Leave a comment:
-
The effects are patent worthy....each and every effect could get its own patent. I am presenting this stuff here.....knowing that the sharks are here watching and learning, contemplating, and when the time comes they will patent what I am giving you for free! You better believe that when they get it, and they will, when it becomes theirs, you're out! They don't have my perspective, they don't have my time with the machines, they don't see what I see, and will not go where I am going with this, where I want all of us to go, together. I was reluctant to post that video because of what human nature has demonstrated in the past.....as an example of this twisted human nature,it's just been suggests that folks would love to start researching right there!?! Insanity!!! I am telling you that what you saw was superseded, and all you have to do to be up to date is get the tool so we can proceed, leaving the past in the past, and you say no!?! I am wasting my time here, and yours. You have what you want now, a demonstration of how easy it is, you will figure it out, but as I said in the video, by the time you do, you will be a day late and a dollar short. For the ones who have done what is necessary to move forward will be applying these principles to real machines while you are still trying to figure out on your own.
Regards
Leave a comment:
-
a easy thing to try-do remove run battery replace with a cap spin rotor by hand ck o scope
Leave a comment:
-
Thank you Erfinder and kiril
Well, that was quite a display, really, thank you for letting me, us, a chance to see this in action! You guys have all seen this before, no wonder people are excited!
Now I'm going to have to watch that again in a quite space, I know I missed a lot of what was said at the end.
Hmmm, so that two coil machine is not something that will give us the effects? I can't imagine what other effects you have!
It did use the 1&3. Do you have these effects in motors that do not start with that wave?
You showed a sinusoidal wave transform to square. That is not the effect either. But that is quite an effect. Nice Mr.Erfinder.
Ok, then you charge a buffer capacitor higher then supply, when you stop switching, the big wow. So, that is not the effect either, holy ****, what else you got, does the thing fly as well
Yeah, well, you say that is not the machine to waste time on, but most folks would probably love to start right there, those were great effects, in my most humble opinion!
And none of those effects are in your opinion, meat and potatoes, you must have a very good grasp on this, and can explain those effects. I think I can not explain those effects, definitively, that looks like a great place to start experimenting. What if everyone here could explain those effects, I say that because I am certain most cannot, don't you think that would be a great place to start, Erfinder. Why can't people learn from building that?
Well, I thank you once again for the video you've shared, and I am really impressed with your work, fine job young man.
Leave a comment:
-
At 5:30"If you understand this, you'll understand why I've adopted the topology that I've adopted.""Don't stagnate on this. The future is behind the scope."
I add this quote from Erfinder as something to ponder regarding the generator section of his apparatus:
o The second type of machine is foreign to all but a few. This type of machine has no effect on the prime movers consumption, positive or negative. When this generator is loaded, impedance unspecific, a magnetic field is generated which at first glance appears to be cancelling itself as its being generated. The field isn't cancelling, think about it, that which we call neutralization or cancellation in coils we call attraction when dealing with permanent magnets. In this type of generator the coils are not dominated by their inductive property, the field is moving inward versus outward (look between the turns people....method to the madness). This kind of system is in my opinion capacitive, implosive, the magnetic field is moving in the direction of.....the space between spaces....what does the magnetic field meet when it arrives at its destination...the dielectric field maybe?
Hope I'm not leading anyone astray.
Bob
Edit: If maximum induction occurs in a coil as a magnet approaches the coil's line of symmetry, how can we capitalize on it in order to produce what I would call the "Erfinder Effect"?
Leave a comment:
-
Originally posted by Halfcutt View PostWere we supposed to get a link, or did I miss my opportunity to see this machine again.
Maybe my browser needs updating, I get nothing when I click on the above links.
If download doesn't start automatically, right-click on the link and make "Save link as..."
Regards,
Kiril
Leave a comment:
-
Were we supposed to get a link, or did I miss my opportunity to see this machine again.
Maybe my browser needs updating, I get nothing when I click on the above links.
Leave a comment:
-
erfinder this forum is known to mess links up.... it changes percentage signs and other things.... it shouldve been fixed long ago but oh well..... maybe you could just tell us what to delete from that link to make it work??? (looks like aln beat me to it)
Leave a comment:
-
https://dl.dropboxusercontent.com/u/...20Lane%202.wmv
percent = %
https://dl.dropboxusercontent.com/u/...20Lane%202.wmvLast edited by aln; 08-20-2014, 12:41 PM.
Leave a comment:
-
Guys....a picture....how about a video......I withhold details, because the geometry is wrong. You don't care, you only want the effects, and not all the rest, I am trying to share something that will enable you to retrofit real machines, but you want what you want, fine! Here is what you want. Remember, this is what you wanted, and not what I wanted for you. I am not answering posts regarding this video. Anyone can get the effects, I stated that time and time again, the only one who has even tried was smart enough to understand that there was more to it, and nothing he was going to do would get him that, he is a wise man, you need the tool, whether you think you need it or not, without it, it will be difficult if not impossible to comprehend what I am GIVING YOU! You don't even know what I am giving you! How can you without the proper tool. I don't care if they get mad this time, its fact! What I am sharing with you applies to my topology, not the one you will try and put together based on your interpretations of what I am saying.
And please don't remind me of how expensive it is! I am well aware of its cost, I had to build over 20 different versions before I got it right for you. I don't feel sorry for you, I have invested more than anyone I know for this quest for understanding, and will gladly invest more! I own every EFTV film, every book they published, all the old films they offer, books from the old Boarderlands, I support those who would deny me the opportunity to support you, and you includes them, I am positive they are profiting from the traffic that this discussion is generating.
Anyway.......Memory Lane is for you to see how stupid simple generating the effects are. It shows you how close many are right now, to the effects, effects which you will want to do many things with, will probably do many things with. I want to show you want we "should" do with them, and more! My terms not yours. When you got what I want to give you....then do what you want, chances are, after you see what I see, you will want to do what I want to do!
RegardsLast edited by erfinder; 08-20-2014, 12:41 PM.
Leave a comment:
Leave a comment: