Tweet
My Machine
Good I have your attention on this one.
This is very important in what I’m saying to you, but not to confuse you I have tried to make this very simple. The first motor built I spent hundreds of hours trying to get around what Tom Bearden was saying about energy. So we will start here. I built this motor energizer which is the most important part in this discussion. You see you just can’t hook an off the shelf generator and expect it to charge your batteries it not going to work that way as every boy tries to do at some point unless we are talking about dyna-motors for tube circuits and then you are still going to lose power. My whole life I have spent in electronics so even before I entered DEVRY I had a very good background in engineering from the US Army in microwave.
I struggled with Tom Bearden on a lot of his theory but what I was dealing with was the quantum mechanics and I had to change my way of thinking about things. As an example what does "hooking" del-phi river mean, well nothing to me as I never heard that term ever used in any electronics class, so yes I said to myself BS. So to try and make this real simple for all of you is to just say that hooked means your energy source is in a flow that has no current so in a way it is current-less but it’s just a potential between two dipoles that can make current if coupled correctly like in a storage battery it does not have current until a load is connected to it. Now, this is when the electrons flow and drain the battery which I know you all will agree, but what happens when you keep turning it on and off and it’s not continuous, well the battery will start to recover between the pulses, I did not say recharge itself yet. So let’s get to the point here, the first part of the real free energy generator from the first book is a DC motor which is pulsed at some rate that allows the battery to recover some between the pulses and that was switched through contact brushes so on and off per rotation, one time for 360 degrees. The second part was a fly-wheel to keep up the speed of rotation for the next pulse. The third part is what can be call a flux gate generator meaning that as a load is applied to it the battery current decreases to the DC motor as the flux gate builds opposing magnetic fields in the gates (Flux Gate) so impedance is opposite of a normal generator, but what is left is a very high voltage potential but unless you transform the potential some way you can’t use it for anything, so we use a capacitor of some value depending on the impedance of the flux gate coils. The next part was to give enough time for the capacitor to charge to some value and then switch that across the battery at about 180 degrees from the motor pulse and give enough time for the battery to start to recharge itself, so now we have the phi 0 Dot current from Bearden’s paper. The switch brushed contacts gave the most power as it was a direct contact, but keeping brushes and contacts clean was another issue.
So after Jim Watson built two machines and presented them at the Tesla conference running, with 500 engineers in the room at the time did they start to get the feeling they would be cleaning buildings the rest of their life they turned white as a ghost and immediately the machine disappeared from view and I mean now. The reason was machines do not re-charge batteries they waste energy. The going price for Jim was 2 million plus dollars and anything you want but you will never talk again to anybody about it. Jim Watson did not care about anything including people he just wanted the money and can be seen driving around with all he wants until the economy crashes and money is no longer the same. I was in the dark with Jim as he had me help him with all the answers and then the big day came for me. Two big burly guys showed up at my shop and put me against the wall and said you will by gasoline the rest of your life or you will be gone from the earth. I answered the questions with the right answer and they left. Later they would send people around to check to see if I was building the machine but I was not doing anything except Amplifiers. Believe me I was thinking how I could do this without them knowing what I was up too.
It was not until I started to talk on the internet as the first servers started to build up traffic. Keelynet was the site I posted everything on but in the meantime I was working on my machine only because I did not want to give up on anything I learned about all of this strange electronics I had discovered. I no longer view electronics the same way or how magnetic fields worked. This is my point of view and you can accept what I say or not it does not make any difference to me. I had to say this at this point because I see thing much different than most of you on the group. So what I did was allow a little girl build the monopole motor for the science fair of which she was kicked out right away it was the kids in her class that protested as the teachers did not understand how it could run so long and run that load, even if nothing was going back to the battery, but I have already explain that to you early on here. This was my chance to start to release information as now I moved to Idaho and I was in the sticks so I did not worry about anything and the first thing I did was to put up an internet page with some of the drawings of the models I had built the pages you can still find and information was collected by many people which is what I wanted to do, but you have never seen me sell one machine, others have sold machines but not John. What I did do is allow you to build the machine I did not say that you could understand what I was thinking or what I posted as some of the things are off the wall, but what has been done is that I built the machine and gave a demonstration on it in front of everybody at the conferences even to this day and when I do it works right in front of you and your always free to ask and measure anything in front of everybody.
I do not like when I see bastardized machines and then the comment is given that it does not work, I know different. So What I’m trying to show you is the way it works. I said that brush contacts work much better and that the coil is not what you think it is as it is an energy pump when used this way and that it makes the same flow the original machine did but now it is done solid state and if you had to you could switch it with brushes and it would do the same thing and a little more output. And yes the diode would go in the same place and if you understand it, it could be put back to the front battery once converted by a capacitor. The two energies are much different so they cannot be combined until you do something to convert it so it is acceptable to the front battery and that is the way it works. The Coil is in space surrounded by energy that is not coupled into anything so nothing can be captured for use until you compress through the use of the Bloch Wall of the electromagnet this make the same thing as the flux gate the diode just directs it to the secondary battery of which you could just pile on more batteries. It does not make any difference because their is no current there, you’re not working with current but you are working with a high potential of which the battery will change for you as it moves the ions to the opposite plate of the battery. So that little Girl started all of this by a public release. I have built all the cap dumps and the linear regulator circuits and Teslagenx has even built them so its not like people cant build these devices or get parts to do it. I'm going to add more to all of this but the Monopole is what the Watson machine was on a much smaller scale, so I'm back to my next 3D print of the SSG Magneto.
John B
Good I have your attention on this one.
This is very important in what I’m saying to you, but not to confuse you I have tried to make this very simple. The first motor built I spent hundreds of hours trying to get around what Tom Bearden was saying about energy. So we will start here. I built this motor energizer which is the most important part in this discussion. You see you just can’t hook an off the shelf generator and expect it to charge your batteries it not going to work that way as every boy tries to do at some point unless we are talking about dyna-motors for tube circuits and then you are still going to lose power. My whole life I have spent in electronics so even before I entered DEVRY I had a very good background in engineering from the US Army in microwave.
I struggled with Tom Bearden on a lot of his theory but what I was dealing with was the quantum mechanics and I had to change my way of thinking about things. As an example what does "hooking" del-phi river mean, well nothing to me as I never heard that term ever used in any electronics class, so yes I said to myself BS. So to try and make this real simple for all of you is to just say that hooked means your energy source is in a flow that has no current so in a way it is current-less but it’s just a potential between two dipoles that can make current if coupled correctly like in a storage battery it does not have current until a load is connected to it. Now, this is when the electrons flow and drain the battery which I know you all will agree, but what happens when you keep turning it on and off and it’s not continuous, well the battery will start to recover between the pulses, I did not say recharge itself yet. So let’s get to the point here, the first part of the real free energy generator from the first book is a DC motor which is pulsed at some rate that allows the battery to recover some between the pulses and that was switched through contact brushes so on and off per rotation, one time for 360 degrees. The second part was a fly-wheel to keep up the speed of rotation for the next pulse. The third part is what can be call a flux gate generator meaning that as a load is applied to it the battery current decreases to the DC motor as the flux gate builds opposing magnetic fields in the gates (Flux Gate) so impedance is opposite of a normal generator, but what is left is a very high voltage potential but unless you transform the potential some way you can’t use it for anything, so we use a capacitor of some value depending on the impedance of the flux gate coils. The next part was to give enough time for the capacitor to charge to some value and then switch that across the battery at about 180 degrees from the motor pulse and give enough time for the battery to start to recharge itself, so now we have the phi 0 Dot current from Bearden’s paper. The switch brushed contacts gave the most power as it was a direct contact, but keeping brushes and contacts clean was another issue.
So after Jim Watson built two machines and presented them at the Tesla conference running, with 500 engineers in the room at the time did they start to get the feeling they would be cleaning buildings the rest of their life they turned white as a ghost and immediately the machine disappeared from view and I mean now. The reason was machines do not re-charge batteries they waste energy. The going price for Jim was 2 million plus dollars and anything you want but you will never talk again to anybody about it. Jim Watson did not care about anything including people he just wanted the money and can be seen driving around with all he wants until the economy crashes and money is no longer the same. I was in the dark with Jim as he had me help him with all the answers and then the big day came for me. Two big burly guys showed up at my shop and put me against the wall and said you will by gasoline the rest of your life or you will be gone from the earth. I answered the questions with the right answer and they left. Later they would send people around to check to see if I was building the machine but I was not doing anything except Amplifiers. Believe me I was thinking how I could do this without them knowing what I was up too.
It was not until I started to talk on the internet as the first servers started to build up traffic. Keelynet was the site I posted everything on but in the meantime I was working on my machine only because I did not want to give up on anything I learned about all of this strange electronics I had discovered. I no longer view electronics the same way or how magnetic fields worked. This is my point of view and you can accept what I say or not it does not make any difference to me. I had to say this at this point because I see thing much different than most of you on the group. So what I did was allow a little girl build the monopole motor for the science fair of which she was kicked out right away it was the kids in her class that protested as the teachers did not understand how it could run so long and run that load, even if nothing was going back to the battery, but I have already explain that to you early on here. This was my chance to start to release information as now I moved to Idaho and I was in the sticks so I did not worry about anything and the first thing I did was to put up an internet page with some of the drawings of the models I had built the pages you can still find and information was collected by many people which is what I wanted to do, but you have never seen me sell one machine, others have sold machines but not John. What I did do is allow you to build the machine I did not say that you could understand what I was thinking or what I posted as some of the things are off the wall, but what has been done is that I built the machine and gave a demonstration on it in front of everybody at the conferences even to this day and when I do it works right in front of you and your always free to ask and measure anything in front of everybody.
I do not like when I see bastardized machines and then the comment is given that it does not work, I know different. So What I’m trying to show you is the way it works. I said that brush contacts work much better and that the coil is not what you think it is as it is an energy pump when used this way and that it makes the same flow the original machine did but now it is done solid state and if you had to you could switch it with brushes and it would do the same thing and a little more output. And yes the diode would go in the same place and if you understand it, it could be put back to the front battery once converted by a capacitor. The two energies are much different so they cannot be combined until you do something to convert it so it is acceptable to the front battery and that is the way it works. The Coil is in space surrounded by energy that is not coupled into anything so nothing can be captured for use until you compress through the use of the Bloch Wall of the electromagnet this make the same thing as the flux gate the diode just directs it to the secondary battery of which you could just pile on more batteries. It does not make any difference because their is no current there, you’re not working with current but you are working with a high potential of which the battery will change for you as it moves the ions to the opposite plate of the battery. So that little Girl started all of this by a public release. I have built all the cap dumps and the linear regulator circuits and Teslagenx has even built them so its not like people cant build these devices or get parts to do it. I'm going to add more to all of this but the Monopole is what the Watson machine was on a much smaller scale, so I'm back to my next 3D print of the SSG Magneto.
John B
Comment