Announcement

Collapse
No announcement yet.

Free 2014 Energy Conference Video Available Now

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Free 2014 Energy Conference Video Available Now

    TOPICS
    • FREE Video from 2014 Energy Science & Technology Conference
    • 48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE – SERPS COP 47.9 (4790%)!!!!



    Hi Friends,


    The 2014 Energy Science & Technology Conference was an incredible success! Many are saying it is the most important conference they have been to in their lives from any category of conference.

    I’ve been to three conferences: 2010, 2013 and 201. This year’s conference was the best so far! There isn’t even a close second.” – Breck

    I drove a total of 3478 miles round trip to attend the convention and was able to personally talk with, and ask questions of, all the presenters. I really appreciated the opportunity for the one on one contact and getting to see the equipment and demonstrations up close and personal! Thanks for holding the convention and thanks to all the presenters! It was time, energy and money well invested.” – Gary Hammond

    Enjoyed the conference and was worth the 2700 kms I put on the wife’s van. As a fabricator and builder the conference was a bit overwhelming but the connections I made were well worth the trip. I would go again and look forward to your next one.” – Jerry Sand

    FREE Video from 2014 Energy Science & Technology Conference

    To view this free video from the conference, you must be a subscriber to the Energy Times newsletter. If you are already a subscriber, you will receive an email with the viewing instructions. If not, go here to watch the video: http://www.emediapress.com/energytimes.php?offer=qiman



    After you click the confirmation link in the email that comes, the first newsletter will have the video link and password. Make sure to give the video a thumbs up to show your support for all the speakers!


    48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE!


    Beginning in two days, the 2014 Conference Film Series will start being released. The first presentation will be the monumental presentation by Jim Murray and Paul Babcock about Jim’s amazing SERPS device. SERPS stands for Switch Energy Resonant Power Supply and is the ultimate in methods for using, storing, and returning electricity to its source!In the first hour, Jim Murray shows the various machines he built and tested over the last 35 years that lead to the understanding of how to build the SERPS device. In the second hour, Paul Babcock explains the theoretical operations of the SERPS system showing how it borrows, uses, and returns electrical power to the source.

    The presentation then switches to a clip in the exhibit room where the working model was running and demonstrating 4790% MORE WORK THAN IS SUPPLIED IN NET ENERGY FROM THE POWER SUPPLY – THAT IS A COP OF 47.9!!! It ends with a Q&A by Paul back in the meeting room. A separate PDF file of all of the slides shown in the Power Point Presentation will be included.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  • #2
    Wicked! Glad the conference went well!!



    Originally posted by Aaron Murakami View Post
    TOPICS
    • FREE Video from 2014 Energy Science & Technology Conference
    • 48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE – SERPS COP 47.9 (4790%)!!!!



    Hi Friends,


    The 2014 Energy Science & Technology Conference was an incredible success! Many are saying it is the most important conference they have been to in their lives from any category of conference.

    I’ve been to three conferences: 2010, 2013 and 201. This year’s conference was the best so far! There isn’t even a close second.” – Breck

    I drove a total of 3478 miles round trip to attend the convention and was able to personally talk with, and ask questions of, all the presenters. I really appreciated the opportunity for the one on one contact and getting to see the equipment and demonstrations up close and personal! Thanks for holding the convention and thanks to all the presenters! It was time, energy and money well invested.” – Gary Hammond

    Enjoyed the conference and was worth the 2700 kms I put on the wife’s van. As a fabricator and builder the conference was a bit overwhelming but the connections I made were well worth the trip. I would go again and look forward to your next one.” – Jerry Sand

    FREE Video from 2014 Energy Science & Technology Conference

    To view this free video from the conference, you must be a subscriber to the Energy Times newsletter. If you are already a subscriber, you will receive an email with the viewing instructions. If not, go here to watch the video: http://www.emediapress.com/energytimes.php?offer=qiman



    After you click the confirmation link in the email that comes, the first newsletter will have the video link and password. Make sure to give the video a thumbs up to show your support for all the speakers!


    48 HOURS UNTIL THE RELEASE OF JIM MURRAY & PAUL BABCOCK’S PRESENTATION FROM THE ENERGY CONFERENCE!


    Beginning in two days, the 2014 Conference Film Series will start being released. The first presentation will be the monumental presentation by Jim Murray and Paul Babcock about Jim’s amazing SERPS device. SERPS stands for Switch Energy Resonant Power Supply and is the ultimate in methods for using, storing, and returning electricity to its source!In the first hour, Jim Murray shows the various machines he built and tested over the last 35 years that lead to the understanding of how to build the SERPS device. In the second hour, Paul Babcock explains the theoretical operations of the SERPS system showing how it borrows, uses, and returns electrical power to the source.

    The presentation then switches to a clip in the exhibit room where the working model was running and demonstrating 4790% MORE WORK THAN IS SUPPLIED IN NET ENERGY FROM THE POWER SUPPLY – THAT IS A COP OF 47.9!!! It ends with a Q&A by Paul back in the meeting room. A separate PDF file of all of the slides shown in the Power Point Presentation will be included.

    Comment


    • #3
      when I enter my name and email it just says I am already subscribed no vid link

      Comment


      • #4
        That means you're already subscribed to Energy Times. All Energy Times subscribers were sent an email with a direct link and password to the video - did you not get that email?
        Aaron Murakami





        You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

        Comment


        • #5
          Joster,

          I emailed you directly. I'd recommend deleting your message with your email so spam bots don't get it.
          Aaron Murakami





          You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

          Comment


          • #6
            great vid! so once/if murray gets a patent then we will get the circuits etc?

            also, who is the fellow on the left(no Peter) the other fella?

            Comment


            • #7
              Aaron,
              Looks like I haven't received the Energy Times email either. Same symptoms.
              Cheers
              David

              Comment


              • #8
                Originally posted by PradeepKumar
                Hey is the link working even now? I couldn't get more of it.
                What link?
                Aaron Murakami





                You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

                Comment


                • #9
                  I cant find a link to the video... I am subscribed though...

                  Help?


                  -Pastor Gordon
                  “Whether you think you can, or you think you can't, you're right.”

                  Comment


                  • #10
                    Scroll down on this page: http://energyscienceconference.com/
                    you'll see the 2014 panel discussion.

                    Originally posted by Pastor Gordon View Post
                    I cant find a link to the video... I am subscribed though...

                    Help?


                    -Pastor Gordon
                    Aaron Murakami





                    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

                    Comment


                    • #11
                      I emailed you directly. I did recommend deleting your message with your email so spam bots don't get it.

                      Comment


                      • #12
                        Originally posted by NathanaelTillman View Post
                        I emailed you directly. I did recommend deleting your message with your email so spam bots don't get it.
                        What message has the email?
                        Aaron Murakami





                        You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

                        Comment

                        Working...
                        X